6 Image Acquisition
Operator’s Manual 6 - 31
In live mode, you can save the interested images by selecting [Pro Capture] and [Retro
Capture].
• Cine saving
In live mode, select the Freeze button to enter cine review status.
Tap [Save Clip] button.
6.15.5 Micro Flow Enhancement
MFE superimposes and processes multiple frames of contrast image during the cycle; it indicates
tiny vessel structures in detail by recording and imaging microbubbles.
• MFE imaging is available only for real-time imaging or cine file of auto review mode. If a
MFE cine is reviewed manually, MFE effect cannot be displayed.
• In MFE status, patient should lie down and hold breath, and transducer should be kept still.
Perform the following procedure:
1. During real-time scanning, select [MFE] to start MFE imaging.
2. Use [MFE Period] to select different imaging period suitable for current flow. Where, MAX is
the maximum superimposing effect.
6.15.6 Contrast Imaging QA
Contrast Imaging QA images are provided for reference only, not for confirming
a diagnosis.
• In case of inaccuracy of the data, do not adjust the depth and the pan-zoom when saving the
cine.
• If the contrast signal inside the selected ROI does not meet the requirements of gamma fitting
condition, that is the bulleting injection, curve fitting may not be available.
Contrast Imaging QA adopts time-intensity analysis to obtain perfusion quantification information
of velocity flow. This is usually performed on both suspected tissue and normal tissue to get
specific information of the suspected tissue.
To Next Page
Loading...
