EasyManua.ls Logo

Mindray Eagus TEX21 - Needle-Guided Bracket Inspection and Installation

Mindray Eagus TEX21
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 Probes and Biopsy
Operator’s Manual 13 - 21
Table 13-4 Disposable Brackets
13.2.2 Needle-Guided Bracket Inspection and Installation
A needle-guided bracket is available for purchase as an optional accessory; it is used in
combination with the probe. Some of the probes have matched needle-guided bracket and needles.
To order needle-guided brackets, contact MINDRAY Customer Service Department or sales
representative.
For biopsy or treatment, ultrasound-guided biopsy procedures can be performed using the probe in
combination with a needle-guided bracket (optional accessory) and a biopsy needle (provided by
the user).
Be sure to perform inspections before and after use of the needle-guided bracket. If an abnormality
is found on the needle-guided bracket, immediately stop using it and contact MINDRAY Customer
Service Department or sales representative.
Sterilize the needle-guided bracket before and after use.
Put on the sterile probe sheath before installing to the probe.
Confirm that the needle-guided bracket is free of damage, deformation, stripping, malfunction,
loose, or missing parts.
Confirm that the needle-guided bracket is securely mounted in the correct position.
Select the proper needle according to the specification above, and adjust the needle shift to the
same specification of the selected needle.
Probe model Needle-guided Bracket Model
L14-6Ns CIVCO 658-001
L14-5sp CIVCO 698-006
C4-1s CIVCO 698-019
CIVCO 698-013
V11-3Hs CIVCO 610-543
CIVCO 610-1274
C6-2Gs LPUBKG81
SC6-1s/C5-1s LPUBKG60

Table of Contents

Related product manuals