Mindray Eagus TEX21 - Product Specifications; Power Supply; Environmental Conditions; Dimensions and Weight

2 - 2 Operator’s Manual
2 System Overview
EQUIPMENT not suitable for use in the presence of a FLAMMABLE ANESTHETIC
MIXTURE WITH AIR OR WITH OXYGEN OR NITROUS OXIDE
• According to the mode of operation:
Continuous operation
• Does the equipment has any defibrillation-proof applied parts:
Non-defibrillation-proof applied part
• Device signal input and output part:
Have device signal input and output parts
• Permanently installed equipment or non-permanently installed equipment:
Non-permanently installed equipment
2.4 Product Specifications
NOTE:
The functions described in the operator’s manual may vary depending on the specific system
purchased.
2.4.1 Power supply
• Voltage: 100-240V~
• Frequency: 50/60Hz
• Power input: 6.4-3.2A
2.4.2 Environmental Conditions
• Operating conditions
– Ambient temperature: 0 °C ~+ 40 °C
– Relative humidity: 20% ~ 85% (no condensation)
– Atmospheric pressure: 700 hPa ~ 1060 hPa
• Storage and transportation conditions
– Ambient temperature: -20 °C ~ 55 °C
– Relative humidity: 20% ~ 95% (no condensation)
– Atmospheric pressure: 700 hPa ~ 1060 hPa
WARNING
Do not use this system in conditions other than those specified.
2.4.3 Dimensions and Weight
• Dimensions (minimum position): 518±10 (Depth)×569±10 (Width)×1303±10 (Height) mm
• Weight (without any optional hardware accessories or peripherals, without probe): ≤
60kg±5kg
2.5 Product Differences