4 Setup
Operator’s Manual 4 - 41
Perform the following procedure:
1. Select “Enable Q-Path”.
2. Enter the website, account and password of the target service.
3. Select user type: Personal User or Default User.
– Personal User: the personal user needs to enter the user name and password in every-time
login.
– Default User: after the default user enters the user name and password in the field box of
the “User Name” and “Password”, and tap [Save], no login is required to access the Q-
Path server later.
4. Select an appropriate item from the drop-down list of “Available Items”.
5. Select an exam mode in the left “Exam Mode” column.
6. Select a worksheet in the right “Worksheets” column.
7. Tap [Save] to exit, and the system will shut down.
To Next Page
Loading...
