V Series Operating Instructions 20 - 37
Reports Laser Printer Reports
20.5.11.1 Printing the PAWP Report
1. Select the PA tile.
2. Select the PAWP button.
3. Select the Measure button.
4. Select Accept PAWP button.
5. Select the Print PAWP button.
The report prints.
OR
1. Select the Procedures tab from the Navigation Area.
2. Select the PAWP button.
3. Select Accept PAWP button.
4. Select the Print PAWP button.
The report prints.
5. Select the Done button.
NOTE: Refer to "Pulmonary Artery Wedge Pressure (PAWP)" on page 11-15 for
additional information.
To Next Page
Loading...
Need help?
General
