CCO/Hemo Configuration Continuous Cardiac Output (CCO) & Continuous Hemodynamics (Optional)
1 - 4 Addendum to V Series Operating Instructions
1.2.2 Configuring CCO/Hemo Alarms
For a full explanation about alarm responses and instructions for accessing and using these alarm
dialogs, refer to the Alarms chapter in the V Series Operating Instructions.
1.2.2.1 Alarm Limits: CCO/Hemo Tab
TABLE 1-1 lists the alarm limit ranges for the CCO parameter, which is contained in the CCO tab and
Hemo tab.
TABLE 1-1
PARAMETER
ALARM
LIMIT ADULT PEDIATRIC NEONATE
CCO/CCO STAT
Unit of Measure: L/min
Resolution: 0.1 L/min
Invalid data: “- -”
High Limit Off, 2.
0 to 20.0 Of
f, 2.0 to 20.0 N/A
Low Limit Off, 1.0 to 19.0 Of
f, 1.0 to 19.0 N/A
CCI/CCI STAT
Unit of Measure: L/min/m
2
Resolution: 0.1 L/min/m
2
Invalid data: “- -”
High Limit Off, 2.0 to 20.0 Of
f, 2.0 to 20.0 N/A
Low Limit Off, 1.0 to 19.0 Of
f, 1.0 to 19.0 N/A
SVR
Unit of Measure: dyne-sec/cm
5
Resolution: 1 dyne-sec/cm
5
Invalid data: “- -”
High Limit Off, 500 to 5000 Off, 500 to 5000 N/A
Lo
w Limit Off, 0 to 2000 Of
f, 0 to 2000 N/A
SVRI
Unit of Measure: dyne-sec/cm
5
/m
2
Resolution: 1 dyne-sec/cm
5
/m
2
Invalid data: “- -”
High Limit Off, 1000
to
9950
Of
f, 1000 to 9950 N/A
Low Limit Off, 0 to 4000 Of
f, 0 to 4000 N/A
T Blood
Unit of Measure: °F
Resolution: 0.1 °F
Invalid data: “- -”
High Limit Off, 95.
0 to
110.0
Of
f, 95.0 to 110.0 N/A
Low Limit Off, 80.0 to
100.0
Of
f, 80.0 to 100.0 N/A
T Blood
Unit of Measure: °C
Resolution: 0.1°C
Invalid data: “- -”
High Limit Off,
35.0 to 43.0 Of
f, 35.0 to 43.0 N/A
Low Limit Off, 26.0 to 38.0 Of
f, 26.0 to 38.0 N/A
* The factory default configuratio
n settings are in bold.