V Series Operating Instructions 26 - 19
System Setup System Dialog
•The Cancel button closes the dialog without saving the settings.
•The Accept button saves the settings and closes the dialog.
26.2.10 Removing an Alarm Watch Location
NOTE: Removing alarms from a System alarm watch location affects all the
watched beds.
1. Select the Setup tab from the Navigation Area.
2. Select the System button, enter the password, then select the Accept button.
3. Select the Alarm Watch tab.
4. Select a location from the alarm watch grid.
5. Select the Remove Location button.
26.2.11 Adding Alarms to a Watched Alarm List
NOTE: Adding alarms from a System alarm watch location affects all the
watched beds.
1. Select the Setup tab from the Navigation Area.
2. Select the System button, enter the password, then select the Accept button.
3. Select the Alarm Watch tab.
4. Select the Alarms button.
NOTE: Asystole, V-Fibrillation, and V-Tachycardia are automatically included
in the watched alarms list. They are indicated by the locked icon
(meaning they cannot be removed from the list).
5. Select an alarm from the Choices list (left side of dialog), then select the Add button.
The alarm moves to the Watched Alarms list (right side of dialog).
6. Continue to select the Cancel or Accept button to return to the Main display.
•The Cancel button closes the dialog without saving the settings.
•The Accept button saves the settings and closes the dialog.
To Next Page
Loading...
Need help?
General
