5-19
5.6 Demo Mode
You can enter demo mode only in standby mode.
Demo mode has two types: demo mode with alarm and demo mode without alarm. You can select
either of the two types by clicking the [Demo mode] button.
In demo mode, only the [Demo mode] button is available in the maintenance menu.
The following figure shows the demo mode screen:
5.7 Restore All Default
The restoring all configuration function can be used to restore the current configurations of
patient-related configuration items, machine-related configuration items, and user
maintenance-related configuration items to factory defaults.
The event logs and loops are cleared once you restore all configurations.
The current patient category is switched to the default patient category once you use the restoring
all configuration function.
When you click the [Restore all default] button, an operation confirmation dialog box is
displayed, as shown in the following figure:
To Next Page
Loading...
