Mindray WATO EX-65Pro - Breathing System, Breathing System Accessories and Checkout Procedures; AGSS Connections

3-17
3.2.2 Breathing System, Breathing System Accessories and
Checkout Procedures
1. Breathing system 2. AGSS transfer tube
3. AGSS 4. CO2 absorbent
5. O2 sensor and cable
3.2.3 AGSS Connections
1. Take out the AGSS from the foam and plastic bag.
2. Install the AGSS onto this device via the GCX compatible rail system.
3. Connect the AGSS transfer tube between the AGSS inlet port and this device exhaust
port.
1
2
3
4
5