5-1
5 Factory Maintenance Menu
5.1 Calibration
The calibration screen includes [Flow Sensors], [Pressure sensors], [Zero Sensors], [O2 Sensor],
and [Total Flow Sensor] calibration buttons. When the machine is configured with an AG module
that has the paramagnetic oxygen module, the machine uses the paramagnetic oxygen module
rather than the O2 sensor to monitor the oxygen concentration. In this case, the [O2 Sensor]
calibration button is invisible; otherwise, the [O2 Sensor] calibration button is visible.
Please refer to the following screens:
To Next Page
Loading...
