3-8
20. Push the bag arm assembly into the breathing system and tighten the fixing nut as shown
below.
21. Open the packing box and take out the detachable absorber canister assembly, waste gas
scavenging system hose, and waste gas scavenging assembly gently.
22. Install the white absorber canister hose onto the absorber canister assembly. Install the
absorber canister assembly when it is not stably placed. First install its lower part. Align
the pins with the holes. Then align the upper part. Push in the upper part upward until
the front and back latches are stuck at the proper position.
To Next Page
Loading...
