3-11
35. Put the following parts into the bottom drawer:
Operator’s manual
Sealing washer (P/N: 0348-00-0185)
36. Hang the user guide onto the handle of this device.
Take the following steps to install the anesthesia machine with an air compressor.
1. Loosen the six screws fixing the rear panel of the cart, remove the gas hose, and take out
the rear panel.
2. Remove a drawer from the front, loosen the two screws fixing the front panel of the air
compressor, and take out the front panel.
Take out the gas hose
Take out the drawer
Front panel of the air
compressor
To Next Page
Loading...
