Display & Cine Review 6-5
Tips: you can perform cine review on each image window in the dual/ quad splitting
mode, and set auto review region for each window.
6.2.3 Cine Review in M/ PW/ CW/ TVD Mode
Enter cine review in M/ PW/ CW/ TVD mode, and roll the trackball, the cine images are
displayed on the screen one by one.
Roll the trackball to the left, the review progress slider moves to the left, the images moves to the
right, and the earlier stored images are invoked. Whereas roll the trackball to the right, the review
progress slider moves to the right, and the images move to the left, the recently stored images are
invoked. When you review the images until the earliest or the latest frame, further rolling the
trackball will display the last or first frame.
The cine progress bar at the bottom of the screen (as shown in the figure below):
Cine review operations are the same as those of 2D mode.
Tips: There is no audio when the spectrum is reviewed in manual status but audio
synchronization can be realized in auto review status with speed of ×1.
6.2.4 Linked Cine Review
The linked cine review refers to review of the images captured at the same moment.
Dual live mode(B+C)
B+M
B/B Dual liveDuplex mode
Triplex mode
The frame mark on the time mark of M/PW image indicates the corresponding 2D image.
In the statuses rather than the dual live, you can only review images in the currently active window.
Region
Frame synchronization mark
To Next Page
Loading...
Need help?
General
