Mindray Z60T - Searching a Patient; Patient Data View & Management

10-10 Patient Data Management
10.4.1 Searching a Patient
(1) Select the data source.
(2) Set search conditions of Name, ID, DOB, Exam Date in the "Item" drop-down list.
(3) Enter the keyword in accordance with the “Item” selected, and the system searches
and displays the results in the patient list.
(4) When you select a patient in the patient list, the images of this patient will be
displayed at the bottom of the screen.
Note:
 When you clear the keyword, enter other keyword or cancel the selection “Find in
results”, the system will refresh the searched results.
 Select “Find in results”, the system will do searching based on the last searched
results.
10.4.2 Patient Data View & Management
Select the desired patient information in the list. The following menu pops up:
 Review
Select an exam of a patient, click to enter Review screen.
 Info
Select an exam of a patient, click
on the right side to display the patient information
of this exam.
 Report
After you select an exam of a patient, click
to view the report of this exam for this
patient. If no report is generated in the exam, the system prompts that “There is no report
belongs to the exam”.
 Delete
Select an exam or a patient, click
to delete. However, you cannot delete patient data
being printed, exported or sent, or delete the current exam.
To delete an image, select the image and click the Delete icon on the right side.
 Backup/ Restore
You can back up the selected patient data to the system-supported media in order to view
it on PC, or restore the patient data to the system from an external media.
: Backup. Click to export the selected patient data to the system-supported media.