Mindray Z60T - M General Measurements

8-2 Measurement
Measurement Tools
Function
Volume
The volume of a target.
Cross Line
The length of two line segments, which are perpendicular to each
other.
Parallel Line
The distance between each pair of parallel lines in a sequence.
Trace Length (Trace) Measures the length of a curve on the image.
Trace Len (Spline)
Measures the length of a curve on the image.
Double Dist
Measures the length of two line segments, which are perpendicular to
each other.
Distance Ratio
Measures the lengths of any two line segments and the calculated
ratio.
Area Ratio
The areas of any two regions and the calculated ratio.
B histogram
The grayscale distribution of ultrasonic echo signals in a closed
region.
B profile The grayscale distribution of ultrasonic echo signals across a line.
Color Velocity
Color flow velocity (only valid for Color mode).
Volume Flow Blood flow through some vascular cross section per unit time.
IMT
Measure intima-media thickness.
NOTE: The IMT function is unavailable on the product not configured
with IMT.
8.2.2 M General Measurements
M general measurements refer to general measurements on M mode. The measurements
listed below can be performed:
Measurement
Tools
Function
Distance The vertical distance between two points.
Time
The time interval between any two points.
Slope
Measures the distance and time between two points and calculates the
slope.
HR
Measures the time of n (n≤8) cardiac cycles and calculates the heart rate in
M mode image.
Velocity
Calculates the average velocity by measuring the distance and time
between two points.