Mindray Z60T - Advanced Imaging Features; Color M, Anatomical M, and TDI Modes

Image Optimization 5-21
5.9 Color M Mode
Color M mode provides information of color flow or tissue on the M mode images to indicate
cardiac motion state. It is highly sensitive to the flow or tissue movement.
The Color M mode includes Color Flow M mode and Color Tissue M mode. The linear probe
does not support the Color M mode.
5.9.1 Enter Color M Mode
 Color Flow M Mode
 In B + M mode, press <Color> on the control panel.
 In B + Color, B + Color + PW or B + Color + CW mode, press <M> on the control
panel.
 Color Tissue M Mode (TVM)
 In B + TVI/TVD, or B + TVI + TVD mode, press <M> on the control panel.
 In Color Flow M mode, click [TDI] item on the image menu or press the user-defined
key of TDI.
5.9.2 Exit Color M Mode
 Press <Color> or <M> on the control panel to exit Color M mode.
 Or, press <B> on the control panel to return to B mode.
5.9.3 Color M Mode Image Parameters
 In Color Flow M mode, parameters that can be adjusted are in accordance with those in B,
M and Color modes; please refer to relevant sections of B, Color and M mode for details.
 In Color Tissue M mode, parameters that can be adjusted are in accordance with those in
B, M and TVI modes; please refer to relevant sections of B, M and TVI mode for details.
 ROI Adjustment
ROI determines the size and position of the color flow or color tissue displayed in the
Color M mode image.
 Set the position of the sampling line by moving the trackball left and right, and set the
ROI position by moving the trackball up and down.
 Set the ROI size by moving the trackball up and right.
 Press <Set> to switch the cursor status between the ROI position adjustment and
ROI size adjustment.