Preliminary
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 27
5.2 LEARNING THIRD-PARTY REMOTE CODES
While each miniDSP Flex is supplied with a basic miniDSP remote, it can also “learn” the control codes of a third-
party remote if it supports one of the following remote control codes:
• NEC
• Sony
• Philips RC6
• Apple (old silver remote only)
To initiate the learning process, start the miniDSP-2x4-HD or DDRC-24 plugin and click on the Connect button.
Once connected, drop down the IR Remote menu and select IR learning. Click on the Learn button for an
operation, and then press the desired button on the remote control. If the code is accepted, the status will
change to show a check mark. Repeat for all commands:
To "unlearn" a command, press the Learn button and wait for the plugin to time out. Note that
you cannot “learn” the miniDSP remote – if you program another remote and want to revert to
using the miniDSP remote, simply “unlearn” all codes.
To Next Page
Loading...
