miniDSP Flex - Playing Audio; Connecting Sources; Connecting Amplifier and Speakers

Preliminary
miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice 31
6.3 KEY FEATURES
This section summarizes the key features of the plugin.
6.3.1 Master control
When the plugin is connected, the items in the Master Control area are active. The Mute button disables all
audio output:
The Master Volume display shows the current volume setting. The master volume can be set by clicking here
and typing a new value:
The IP Address and Auto fields are for networked control of the plugin using the miniDSP WI-DG Wifi/Ethernet
to USB bridge. See the Wi-DG User Manual for details.
The DDRC-24 plugin has two additional buttons. The Start Dirac Live Software button will disconnect the plugin
from the miniDSP Flex and start up the separate Dirac Live application.
You must start the Dirac Live application from within the DDRC-24 plugin using the Start Dirac Live
Software button. If you open the Dirac Live application by itself, it will not be able to detect the
miniDSP Flex.
The Dirac Live button turns Dirac Live processing on and off: