4. Commissioning
MiR100 User guide (en) 09/2019 - v.1.4 ©Copyright 2019: Mobile Industrial Robots A/S. 24
2. In a browser, go to the address mir.com and sign in.
The robot is now ready to move down the ramp. To do this switch to manual mode and
use the electronic joystick in the robot interface. See next section Driving the robot in
manual mode below.
4.3 Driving the robot in manual mode
To drive the robot in Manual mode:
1. In the robot interface, select the joystick icon. Then press Manual control and the
joystick control opens.
To Next Page
Loading...
