6. Maintenance
MiR100 User guide (en) 09/2019 - v.1.4 ©Copyright 2019: Mobile Industrial Robots A/S. 47
Part Maintenance Interval
Safety stickers Check if the safety stickers on the
robot are still intact and visible.
Check every six months and
replace as needed.
6.3 Packing for transportation
This section describes how to pack the robot for transportation.
Original packaging
Use the original packaging materials when transporting the robot.
The packaging materials are:
• The bottom of the box (the pallet).
• The lid of the box (the ramp).
• The walls of the box.
• Protective foam blocks: Side blocks and the top layer.
• Screws.
Packing the robot for transportation
To pack the robot for transportation:
1. Shut down the robot. See section .
2. Turn the battery disconnect switch to position OFF (the two yellow indicators pointing to
off).
Repeat the steps in section Getting started on page16 in the reverse order.
To Next Page
Loading...
