6-6 Mx100/200 Series Operation Manual
Introduction This chapter covers the process up to production using the program of the
MIRAE
Mx100/200 series SMD Placement System.
This chapter describes various functions and placing job using programs
such as program editor, production and system setup. This chapter also
describes the process to create a program by CAD Conversion or by
programming, carry out PWB and fiducial data setting, data check and
optimization and actually produce boards using the production program.
This chapter includes:
• Introduction
• Work flow chart
• CAD Conversion
• PWB Information
• Entering fiducial mark DB
• Entering pick data
• Entering place data
• Optimization
• Direct teaching (position input)
• Production
Work Flow Chart
To Next Page
Loading...
