Mirae Mx400 - Regular Check

Mx-Series Manual
REGULAR CHECK
Table of Contents
DAILY CHECK (EVERY 24
HOURS).....................................................................4-3
AIR PRESSURE CHECK (BEFORE
RUNNING).............................................4-3
CLEANING THE LINEAR MOTOR STATOR (BEFORE
RUNNING)...........4-4
MACHINE INTERIOR CHECK (BEFORE
RUNNING)....................................4-5
ABNORMAL NOISE CHECK (AFTER
RUNNING)..........................................4-6
WEEKLY CHECK (EVERY 150
HOURS)..............................................................4-7
CAMERA LENS AND LENS
COVER.................................................................4-7
NOZZLE
CHECK...................................................................................................4-
9
CHECKING THE BLOWING LEVEL VALUE AT THE NOZZLE
TIP..........4-12
CHECKING THE VACUUM PRESSURE AT THE NOZZLE
TIP................4-13
NOZZLES APPLICABLE BY
COMPONENT..................................................4-14
MONTHLY CHECK (EVERY 500
HOURS).........................................................4-20
LINEAR SCALE
CHECK....................................................................................4-20
LINEAR SLIDE
CHECK......................................................................................4-22
CHAPTER