4-8 Offline Feeder Setup Manual
<Fig. 4-4ᆞ Printer Setup Window>
Model
With this button, you can select a certain model supported by this
program.
Offset Position
Sets the offset position to print the barcode (Default: 0).
Label Gap and Size (Eltron printer only)
Sets the label size and the gap between labels to print the barcode
(Default: Gap [3], X[92], Y[25]). If print the “Feeder No” barcode this
parameter should be modified according to the label size.
Image Name (Eltron printer only)
Shows the image name to be saved to the printer.
Download (Eltron printer only)
This button appears when the selected printer is Eltron TLP2742, to
download the logo image to the printer.
HELP MENU
Help menu has Contents, Search for Help On, How to Use Help and About
submenus as shown in the following figure.
To Next Page
Loading...
