Mirae Mx400 - Page 334

4- 30 Mx-Series Manual
 Module: Head
 Rack & Pinion greasing
1. Unplug the machine.
Grease could drop during
operation if too much
grease is applied.
2. Apply a moderate amount of grease to the home of the rack gear and move the
nozzle shaft up and down 4-5 times to evenly distribute the grease on the gear.
Make sure to unplug the
Carry out Z-axis Rack & Pinion greasing and checking as
described below.
machine for the
worker’s safety
<Module Head>
Pinion
Rac
k