Mircom ADC Series User Manual

MIRCOM TECHNOLOGIES LIMITED, ADC Series: Autodialer Telephone Access Systems Page 28
Press * to exit to PROGRAM MODE menu when finished. To quit, enter *000 while at the PROGRAM MODE menu
to return to NORMAL MODE.
REVIEW AND DELETE KEYLESS ENTRY CODES
To review and delete keyless entry codes, scroll through until you reach the feature as shown below.
[1=Bck] [3=Fwd]
Do you want to edit
KEYLESS Codes?
[*=Abort] [#=Yes]
Press # to access the feature. The display should appear...
-Program Options-
Code To Review
# _ _ _ _
Please enter choice:
Enter the Keyless Entry Code to review or delete. The next display should appear...
-Program Options-
KEYLESS Entry
Code # x x x x
Please enter choice:
Press 1 or 3 to scroll up or down the list. To delete the displayed code, press #. When finished, press * to exit to the
PROGRAM MODE menu for programming other functions. To quit, enter *000 while at PROGRAM MODE menu
to return to NORMAL MODE.
REPROGRAM MASTER CODE
Master Code (factory default *999) may be changed to any desired three (3) digit code number. Since this code is
used to access all levels of programming, it would be a good idea to change the code to one that will be known only
by the installer or management personnel. Please enter the new Master Code in the space provided below for future
reference.
New Master Code: ___________________ Date: ______________________
To change the MASTER CODE, scroll through until you reach the feature as shown below.
[1=Bck] [3=Fwd]
Do you want to edit
the MASTER Code?
[*=Abort] [#=Yes]
Press # to access the feature. The display should appear...
-Program Options-
MASTER CODE
*_ _ _
Please enter choice:
Enter the New Master Code. Please do not use *888 for Master Code. The next display should appear...
-Program Options-
#=Store, *=Abort
* x x x
Please enter choice:

Mircom ADC Series Specifications

General

Brand	Mircom
Model	ADC Series
Category	Intercom System
Language	English