Mitel 3000 - Accessing the Programming Interface; Via PC Connected to LAN; Via MPS Application

Mitel 3000
Broadband Module Manual
8
C
ONNECTING TO THE PROGRAMMING INTERFACE
The Broadband Module Programming and Maintenance pages can be accessed from: -
- A PC Connected to the LAN (see note below concerning the Wireless LAN)
OR
- The MPS application.
Note
The MPS application is the Management and Programming
application on the CD supplied with the system
Connecting to the programming interface from a PC connected to the LAN
To connect to the Programming and Maintenance pages launch the browser on any PC
connected to the LAN.
Enter
http://192.168.1.1 in the address field and press return.
Enter Username (admin) and Password (admin).
Note
If the log on screen does not appear please refer to page 87.
The Basic Configuration screen is displayed.
Note
In order to provide maximum security, PCs connected to the Wireless LAN are not
allowed to program the module via the web interface. If you wish to program from a
wireless PC the WLAN interface should be relocated on the LAN. See page 53.