Mitel 3000
Broadband Module Manual
28
VoIP TRUNKS
There are two elements to programming VoIP Trunks.
- Programming the VoIP proxy server settings. The VoIP service provider supplies the
details for this.
- Programming endpoints as VoIP trunks rather than IP Extensions.
Proxy Server Settings
Select VoIP from the Setup menu
Select Change Advanced VoIP Settings here…
Enter the following parameters. The VoIP service provider provides these:
• User Domain – enter a URL or an IP address
• Registrar Proxy Server – enter a URL or an IP address
• Registrar Server Port – the default value is 5060. If a different port number is used,
enter it here.
• Registrar Server Expiry Time – the default value is 3600. If a different time period is
used, enter it here
• Transport for Invite Requests – select TCP or UDP from the drop-down menu
• QoS: RTP DSCP – this parameter is only used on a Quality-of-Service enabled network
and will be provided by the network administrator. Where a standard Internet connection
is used, leave this parameter at the default setting of 0
To Next Page
Loading...
