Mitel 3000 User Manual

Mitel 3000
Broadband Module Manual
43
The ISDN setup is now complete.
SETTING UP THE WIRELESS LAN (WLAN)
The Broadband Module is equipped with a Wireless LAN and can connect to PCs that are
equipped with a wireless interface.
WARNING
For security reasons the WLAN is located on the DMZ by default. If you have a
combination of wired and wireless PCs connected to the module it is
recommended that the WLAN be relocated to the LAN. This should only be done
when the security on the WLAN is programmed. See page 49 for programming
security and page 46 for relocating the WLAN.
WLAN Range
Wireless LAN speed drops the further the wireless device is away from the Broadband
Module. If there is a clear line of sight between the Broadband Module and the wireless
device it can operate at reduced speeds at up to about 90m (300 feet). However this range is
reduced if there is no clear line of sight between the module and the wireless device.
Quick Setup to WLAN Without Security
This procedure should only be used to setup and test WLAN connectivity. When this
procedure has been completed and WLAN connectivity has been established, go to the next
section - Setting Up WLAN With Security on page
48 and complete the process.

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English