Mitel 3000
Broadband Module Manual
9
Connecting to the programming interface from the MPS
Connect the PC with MPS directly to the V.24 interface on the PBX and launch MPS. The
application can be found on your documentation CD that came in your Mitel 300 system. (By
default, MPS is installed in the Program Files directory.)
Select Connect
On the pop-up menu select the COM port and speed. The default speed is 115,200.
Select Connect
When the connection is established, select Internet Module on the main menu
Select Broadband Module from the drop-down menu.
The Basic Configuration screen is displayed.
To Next Page
Loading...
