Mitel 3000 - Security Interfaces and NAT; Security Interface Definitions; NAT Operation and Disabling

Mitel 3000
Broadband Module Manual
66
Security Interfaces
Three security interfaces are defined by default.
- ipwan (external) to internal
- ipwan (external) to dmz
- ipdmz (dmz) to internal
NAT (Network Address Translation)
NAT operates independently on each interface and is enabled by default on each of the three
interfaces.
To disable NAT
Select Disable NAT to … (Interface)
Restart the module.
Policies, Triggers, Intrusion Detection, Logging
The security policy settings, stateful inspection triggers, intrusion policy detection and logging
settings can be displayed and changed.
dmz
internal
ipwan
NAT
NAT NAT