Mitel 3000
Broadband Module Manual
12
Enter the PPP Username and PPP Password, retype the password, click Next >.
Definition
The Virtual Path Identifier/Virtual Circuit Identifier (VPI/VCI) specify the ATM
connection between the ADSL modem and the service provider. The VPI range
is 0 – 4095. The VCI range is 0 – 65535. These values should be given by your
service provider.
The default VPI and VCI values are shown, if different values are required, enter them here.
Click Next >.
Click Confirm Changes.
The new settings are displayed.
Restart the module by selecting Restart on the left-hand side menu.
To Next Page
Loading...
Need help?
General
