Mitel 3000 - Page 55

Mitel 3000
Broadband Module Manual
52
The entered MAC address is displayed.
Add an address here… takes you back to the previous screen to enter another MAC address
to be restricted.
Remove an address here … takes you to the following screen:
Select the address to remove from the drop down menu.
Click Next>, this takes you back to the Allow all wireless PCs to connect except those I
specify option.
Only allow the wireless PCs I specify to connect *Recommended
Refer to Appendix B to find out the MAC address of a PC.
Enter the MAC Addresses in the table provided in Appendix A.
Click Next >
Select Add an address here…
Enter the MAC address of the PC to be allowed to connect to the wireless network.
Click Next>.