Mitel 3000 User Manual

Mitel 3000
Broadband Module Manual
84
Parameter Description
Inactive – the line is disconnected or the DSL modem is
negotiation with the DSLAM
Operational Mode
G.DMT or T1.413 - indicates the DSL standard that has been
negotiated with the DSLAM
Showtime – the line is synchronised and the ADSL connection is
successfully established
Training - the ADSL modem is negotiating line speed with the
DSLAM
State
Handshake - the handshaking procedure is taking place to
determine the nature and capabilities of the endpoints
Trained transmit bit rate The upstream line speed
Trained receive bit rate The downstream line speed
Upstream power The output power of the ADSL modem
Local/Remote fast
channel FEC error count
The fast channel Forward Error Correction error count measured
at the near/far end
Local/Remote interleaved
channel FEC error count
The interleaved channel Forward Error Correction error count
measured at the near/far end
Local/Remote fast
channel CRC
The fast channel Cyclic Redundancy Check error count
measured at the near/far end
Local/Remote interleaved
channel CRC
The interleaved channel Cyclic Redundancy Check error count
measured at the near/far end
Local/Remote line
attenuation
The line loss measured at the near/far end
Local/Remote signal-to-
noise margin
The signal-to-noise ratio measured at the near/far end
Local/Remote LOS The number of occurrences of Loss of Signal at the near/far end
Local/Remote SEF The number of Severely Errored Frames received at the near/far
end

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English