Mitel 6865i SIP Phone Release 4.1.0 User Guide
4. Press the Change key.
5. Press the Next key to toggle the Filtering option from OFF to ON.
6. Press the Set key.
7. Press the Done key.
A checkmark will be displayed beside the Executive indicating Executive Call Filtering is
to be activated.
8. Press the Done key again.
9. Press the Confirm key to apply the changes and return to the idle screen.
To Deactivate Executive Call Filtering on an Assistant’s Phone when the Filter Key’s
Value is Defined
Use the following procedure to deactivate Executive Call Filtering on an Assistant’s phone when
the Filter key’s value is defined:
1. Press the configured “Filter” key corresponding to the respective Executive.
Executive Call Filtering is now deactivated for that Executive and the key’s corresponding
LED will turn off.
To Deactivate Executive Call Filtering on an Assistant’s Phone when the Filter Key’s
Value is Not Defined
Use the following procedure to deactivate Executive Call Filtering on an Assistant’s phone when
the Filter key’s value is not defined:
1. Press the “Filter” key.
The list of associated Executives will appear on screen.
2. Select the Executive for whom you want to deactivate Executive Call Filtering by pressing
the 2 or 5 navigation keys and then press the Change key.
3. Press the 2 or 5 navigation key to enter the Filtering menu for the respective Executive.
4. Press the Change key.
5. Press the Next key to toggle the Filtering option from ON to OFF.
Notes:
1. The LED corresponding to the “Filter” key will be lit if Executive Call Filtering is
activated for any associated Executive. The LED will turn off if Executive Call
Filtering is deactivated for all associated Executives.
2. If Call Forward is enabled for filtered calls, the LED for the Filter key will be turned off.
IP PHONE UI
Note: If Call Forward is enabled for filtered calls, LEDs for all Filter keys will be
turned off.
IP PHONE UI
To Next Page
Loading...
