Mitel 6865i - Page 185

Additional Features
183
6. Press the Set key.
7. Press the Done key.
An X will be displayed beside the Executive indicating Executive Call Filtering is to be
deactivated.
8. Press the Done key again.
9. Press the Confirm key to apply the changes and return to the idle screen.
To Answer a Filtered Call
Use the following procedure to answer a filtered call:
1. Lift the handset or press the Speaker/Headset key if the phone has no active calls
or
Press the corresponding Line key if on an active call.
To Ignore a Filtered Call
Use the following procedure to ignore a filtered call:
1. Press the Goodbye key if the phone has no active calls
or
Press the Goodbye key if on an active call and the Goodbye Key Cancels Incoming Call
feature is enabled
or
Press and hold the Ignore key until the call is successfully ignored if on an active call and
the Goodbye Key Cancels Incoming Call feature is disabled.
To Push a Filtered Call Back to the Executive
Use the following procedure to push a filtered call back to the Executive:
1. After answering a filtered call, press the Transfer key twice.
The phone will enter in the FAC for the BroadSoft Executive-Assistant Call Push feature
Notes:
1. The LED corresponding to the “Filter” key will be lit if Executive Call Filtering is
activated for any associated Executive. The LED will turn off if Executive Call
Filtering is deactivated for all associated Executives.
2. If Call Forward is enabled for filtered calls, the LED for the Filter key will be turned off.
IP PHONE UI
IP PHONE UI
IP PHONE UI