Mitel 6865i - Page 186

Mitel 6865i SIP Phone Release 4.1.0 User Guide
184
and automatically dial the FAC call.
The FAC call will be answered and the filtered call will be released if the push is successful.
To Perform a Blind Transfer of a Filtered Call to the Executive
Use the following procedure to perform a blind transfer of a filtered call to the Executive:
1. After answering a filtered call, press the Transfer key.
2. Enter the Executive’s phone or extension number and press the Transfer key.
The phone will recognize the Executive’s number and will change the transfer scenario
into an Executive-Assistant Call Push scenario (i.e. the phone will enter in the FAC for the
BroadSoft Executive-Assistant Call Push feature and automatically dial the FAC call).
The FAC call will be answered and the filtered call will be released if the push is successful.
To Perform a Semi-Attended Transfer of a Filtered Call to the Executive
Use the following procedure to perform a semi-attended transfer of a filtered call to the
Executive:
1. After answering a filtered call, press the Transfer key.
2. Enter the Executive’s phone or extension number and press the Dial key.
3. When the call is in the ringing state, press the Transfer key.
The phone will recognize the Executive’s number and will change the transfer scenario
into an Executive-Assistant Call Push scenario (i.e. the phone will enter in the FAC for the
BroadSoft Executive-Assistant Call Push feature and automatically dial the FAC call).
The FAC call will be answered and the filtered call will be released if the push is successful.
Note: If the push is unsuccessful, press the respective Line key (corresponding to
the filtered call) to retrieve the filtered call.
IP PHONE UI
Note: If the push is unsuccessful, press the respective Line key (corresponding to
the filtered call) to retrieve the filtered call.
IP PHONE UI
Note: If the push is unsuccessful, press the respective Line key (corresponding to
the filtered call) to retrieve the filtered call.