Mitel 6865i - Page 188

Mitel 6865i SIP Phone Release 4.1.0 User Guide
186
1. Press the Options key, the 2 navigation key, and then the Enter key to enter the Call
Forward menu
or
Press the Call Forward programmable key.
2. Press the 2 navigation key three times to select Forward Filtering.
3. Press the Change key to enter the Call Forward Mode Forward Filtering menu.
4. Press the 2 navigation key to highlight the Call Forward State menu.
5. Press the Change key to enter the Call Forward State menu.
6. Press the Next key to toggle the Call Forward State option from OFF to ON.
7. Press the Set key.
8. Press the 2 navigation key to highlight the Call Forward Number menu.
9. Press the Change key to enter the Call Forward Number menu and enter a forwarding
number.
10. Press the Set key.
11. Press the Done key.
12. Press the Confirm key to apply the changes.
A checkmark will be displayed beside Fwd Filtering indicating call forwarding of all filtered
calls is to be activated.
13. Press the Done key again.
14. Press the Confirm key again.
15. Press the Goodbye key to return to the idle screen.
The idle screen will display a “CFWD Filtering” message and the Message Waiting Indicator
(MWI) and (if configured) Call Forward key LEDs will be lit indicating Forward Filtering is
activated.
IP PHONE UI
Note: Selecting the “All On” option is also appicable to Forward Filtering. For more
information on the “All On” option, see Using CFWD via the IP Phone UI on
page 147.