132
9 CREATING A HARDWARE LOGIC
9.2 Multi Function Counter Block
■Restrictions on linking the same-color terminals for 16-bit multi function counter blocks
For 16-bit multi function counter blocks, linkable combinations of blocks and terminals are restricted even if the terminals are
in the same color.
• Input signal event detection block and event output terminal
• Comparison block and set/reset block
• Comparison block and event output terminal
• Counter timer block and comparison block (automatically linked in the following combinations by default)
Input signal event detection block (output side) Event output terminal (input side)
Block name Terminal name Block name Terminal name
Input_Signal_Event Output 0 Event output terminal Event 0
Event 1
Output 1 Event output terminal Event 2
Event 3
Comparison block (output side) Set/reset block (input side)
Block name Terminal Block name Terminal name
Compare_0 Upper terminal Set/Reset_0 Set
Reset
Lower terminal Set/Reset_0 Set
Reset
Compare_1 Upper terminal Set/Reset_1 Set
Reset
Lower terminal Set/Reset_1 Set
Reset
Comparison block (output side) Event output terminal (input side)
Block name Terminal Block name Terminal name
Compare_0 Upper terminal Event output terminal Event 0
Event 1
Lower terminal Event output terminal Event 0
Event 1
Compare_1 Upper terminal Event output terminal Event 2
Event 3
Lower terminal Event output terminal Event 2
Event 3
Counter timer block (output side) Comparison block (input side)
Block name Terminal name Block name Terminal name
Counter_Timer_0 Count Value Compare_0 Input
Counter_Timer_1 Count Value Compare_1 Input
To Next Page
Loading...
