192
10 BLOCK LINK EXAMPLES
10.6 Fixed Cycle Output
Operation
The following shows operation of when the fixed cycle output start signal (input terminal 0) is input and when the fixed cycle
output stop signal (input terminal 1) is input.
No. Description
(1) When a signal is input to the input terminal 0, pulse output starts. One pulse is output per cycle.
(2) When a signal is input to the input terminal 1, the pulse output stops.
1000ms
1ms
(1)
(2)
High
Low
High
Low
High
Low
Output terminal
Input terminal 1
Input terminal 0
Cycle time
ON time
Controlled by the flexible high-speed I/O control module
To Next Page
Loading...
