218
13 PROGRAMMING
13.3 When the Module Is Connected to a Head Module
User devices
Device Description
M100 Setting start command
M110 Hardware logic control start command
M111 Hardware logic control stop command
M112 Count value read command
M113 Operating condition batch-reset command
M114 Hardware logic control stop flag clear command at disconnection
M120 Error reset command
M200, M201 Write complete flag
M210, M211 Read complete flag 1
M220, M221 Read complete flag 2
M300 Count value reading flag
M310 Number of writes to a flash ROM reading flag
M1000 Communication ready flag (station number 1)
M1001 Setting request at a startup
M1002 Setting request signal
M1003 Setting complete flag at a startup
D100 (W1010) Storing the latest error code
D200, D201 Storing the cumulative number of write accesses to a flash ROM
D1000 Storing the clear setting of error history
D1010, D1011 Count value
F200 Parameter write complete with an error
F210 Count value read complete with an error
F220 Number of writes to a flash ROM read complete with an error
To Next Page
Loading...
