117
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
4 Devices in Detail
4.8 High-Speed Counter [C] (FX3G/FX3GC PLCs)
1
Introduction
2
Overview
3
Instruction
List
4
Devices
in Detail
5
Specified the
Device &
Constant
6
Before
Programming
7
Basic
Instruction
8
FNC00-FNC09
Program Flow
9
FNC10-FNC19
Move & Compare
10
FNC20-FNC29
Arith. & Logic
Operation
5. High-speed counter device list
*1. C248 and C253 are usually used as counters having reset input, but can be used as counters C248 (OP) and
C253 (OP) not having reset input when used together with special auxiliary relays M8388 and M8392.
→ For the method to switch the counter function, refer to Subsection 4.8.7.
*2. C254 is usually used as a counter having reset input and start input, but can be used as a counter C254 (OP)
not having reset input or start input when used together with special auxiliary relays M8388 and M8395.
→ For the method to switch the counter function, refer to Subsection 4.8.6.
Notation of high-speed counter devices
In some high-speed counters in FX3G and FX3GC PLCs, the input terminal assignment is changed over when used
together with special auxiliary relays.
Such high-speed counter devices are classified below. Note that description as (OP) is not available in programming.
Classification Counter No. Data length
External reset
input terminal
External start
input terminal
1-phase
1-count input
C235
C236
C237
C238
C239
C240
32-bit
bi-directional
counter
Not provided Not provided
C241
C242
C243
Provided Not provided
C244
C245
Provided Provided
1-phase
2-count input
C246
C248(OP)
*1
32-bit
bi-directional
counter
Not provided Not provided
C247
C248
Provided Not provided
C249
C250
Provided Provided
2-phase
2-count input
C251
C253(OP)
*1
C254(OP)
*2
32-bit
bi-directional
counter
Not provided Not provided
C252
C253
Provided Not provided
C254
C255
Provided Provided
Standard Device Numbers Switched Device Numbers
C248 C248(OP)
C253 C253(OP)
C254 C254(OP)
To Next Page
Loading...
Need help?
General
