Mitsubishi FX3U Series Programming Manual

634
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
27 Data Operation 3 – FNC210 to FNC219
27. Data Operation 3 – FNC210 to FNC219
FNC210 to FNC219 provide instructions for reading last-in data and controlling leftward/rightward shift instructions
with carry.
FNC No. Mnemonic Symbol Function Reference
210 FDEL Deleting Data from Tables Section 27.1
211 FINS Inserting Data to Tables Section 27.2
212 POP Shift Last Data Read [FILO Control] Section 27.3
213 SFR
16-bit data n
Bit Shift Right with Carry
Section 27.4
214 SFL
16-bit data n
Bit Shift Left with Carry
Section 27.5
215 − −
216 − −
217 − −
218 − −
219 − −
FDEL D nS
FINS D nS
nPOP DS
nDSFR
nDSFL

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)