Mitsubishi FX3U Series Programming Manual

453
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
16 External FX Device – FNC 80 to FNC 89
16.3 FNC 82 – ASCI / Hexadecimal to ASCII Conversion
11
FNC30-FNC39 Rotation and Shift
12
FNC40-FNC49 Data Operation
13
FNC50-FNC59 High-Speed Processing
14
FMC60-FNC69 Handy Instruction
15
FNC70-FNC79 External FX I/O Device
16
FNC80-FNC89 External FX Device
17
FNC100-FNC109 Data Transfer 2
18
FNC110-FNC139 Floating Point
19
FNC140-FNC149 Data Operation 2
20
FNC150-FNC159 Positioning Control
16.3 FNC 82 – ASCI / Hexadecimal to ASCII Conversion
Outline
This instruction converts hexadecimal code into ASCII code.
On the other hand, BINDA (FNC261) instruction converts binary data into ASCII code, and ESTR (FNC116) instruction
converts binary floating point data into ASCII code.
→ For BINDA (FNC261) instruction, refer to Section 29.6.
→ For ESTR (FNC116) instruction, refer to Section 18.4.
1. Instruction format
2. Set data
3. Applicable devices
S: This function is supported only in FX3U/FX3UC PLCs.
Explanation of function and operation
1. 16-bit operation (ASCI and ASCIP)
"n" hexadecimal code characters (digits) stored in and later are converted into ASCII code, and then stored to
the devices and later.
The 16-bit mode and 8-bit mode options are available for this instruction. For operation in each mode, refer to the
proceeding pages.
Operand type Description Data type
Head device number storing hexadecimal code to be converted 16-bit binary
Head device number storing converted ASCII code
Character string
(only ASCII code)
n
Number of characters (digits) of hexadecimal code to be converted [setting range: 1 to
256]
16-bit binary
Oper-
and
Type
Bit Devices Word Devices Others
System User Digit Specification System User
Special
Unit
Index
Con-
stant
Real
Number
Charac-
ter String
Pointer
XYMTCSD
 .b KnX KnY KnM KnS T C D R U\G V Z Modify K H E "  "P
33333333 S 33 3 33
3333333 S 3
n 33 33
P
FNC 82
ASCI
−
−
Mnemonic Operation Condition
16-bit Instruction
7 steps
ASCI
ASCIP
Mnemonic Operation Condition
Continuous
Operation
Pulse (Single)
Operation
32-bit Instruction
S 1 
S
D
S 1 
S
S 2 
D
S
D
FNC 82
ASCI
nS 
Command
input
D 

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English