Mitsubishi FX3U Series Programming Manual

413
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
14 Handy Instruction – FNC 60 to FNC 69
14.10 FNC 69 – SORT / SORT Tabulated Data
11
FNC30-FNC39 Rotation and Shift
12
FNC40-FNC49 Data Operation
13
FNC50-FNC59 High-Speed Processing
14
FMC60-FNC69 Handy Instruction
15
FNC70-FNC79 External FX I/O Device
16
FNC80-FNC89 External FX Device
17
FNC100-FNC109 Data Transfer 2
18
FNC110-FNC139 Floating Point
19
FNC140-FNC149 Data Operation 2
20
FNC150-FNC159 Positioning Control
2) Sorting result when the instruction is executed with "n = K3 (column No. 3)"
Related device
→ For the instruction execution complete flag use method, refer to Subsection 6.5.2.
Cautions
• Do not change the contents of operands and data while the instruction is executed.
• Before executing the instruction again, set the command input to OFF.
• Limitation in the number of instructions
Only one instruction can be used in a program.
• When the same device is specified in and
The source data is overwritten by the data acquired by sorting.
Take special care so that the contents of are not changed until execution is completed.
Column No. 1 2 3 4
Line No. Control number Height Weight Age
1
+ 5 + 10 + 15
4100208
2
+ 1 + 6 + 11 + 16
1 150 45 20
3
+ 2 + 7 + 12 + 17
2 180 50 40
4
+ 3 + 8 + 13 + 18
5 150 50 45
5
+ 4 + 9 + 14 + 19
3 160 70 30
Device Name Description
M8029
Instruction
execution complete
Turns ON when sorting is completed.
D D D D
D D D D
D D D D
D D D D
D D D D
D 1 S D 1 D
D 1 S

Mitsubishi FX3U Series Specifications

General

Brand	Mitsubishi
Model	FX3U Series
Category	Controller
Language	English