Mitsubishi FX3U Series Programming Manual

610
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
26 Character String Control – FNC200 to FNC209
26.1 FNC200 – STR / BIN to Character String Conversion
• When the devices and later storing a character string exceeds the corresponding device range (error code:
K6706)
Program example
In the program below, the 16-bit binary data stored in D10 is converted into a character string in accordance with the
digit specification by D0 and D1 when X000 is set to ON, and then stored in D20 to D23.
D
X000
Data to be converted is set.
FNC 12
MOVP
K12672 D10
END
K6 D0
K0 D1
FNC200
STRP
D0 D10 D20
FNC 12
MOVP
FNC 12
MOVP
The number of all digits is set.
The number of digits of the decimal
part is set.
12672
6
0
b15 b8 b7 b0
D20
D21
D22
31H(1)
36H(6)
0000H
20H(space)
32H(2)
32H(2) 37H(7)
D23
D10
D0
D1
Number of all digits
Number of digits of
decimal part
16-bit binary data "
12672"

Mitsubishi FX3U Series Specifications

General

Model	FX3U Series
Program Memory	64k steps
Execution Speed	0.065 μs/basic instruction
Type	PLC (Programmable Logic Controller)
Power Supply	100-240V AC
I/O Points	Up to 384
Communication	USB
Expansion	Supported via expansion modules
High-Speed Counters	Up to 6 channels
Analog Input/Output	Available via expansion modules
Temperature Range	0 to 55°C
Programming Language	Ladder Logic, Structured Text
Built-in Functions	PID control
Humidity	5 to 95% (non-condensing)