898
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
A Programming Tool Applicability and Version Upgrade History
A-2 Peripheral product applicability (except programming tools)
FX3U/FX3UC PLC
*1. The F940GOT and ET-940 whose version is earlier than Ver. 1.10 do not support the transparent (2-port)
function of the GX Developer.
Product Name Applicability Remarks
GOT1000 Series
Applicable
(From first product)
The GOT1000 Series is applicable to the device ranges in the FX3U/FX3UC PLCs.
Check the applicability of other items in the GOT manual.
F940WGOT Not applicable The following restriction applies when connected.
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
and program sizes available in the FX2N and FX2NC PLCs.
→ For applicable models, refer to the GOT manual.
For connection using the 2-port interface function
*1
, refer to Appendix A-1-4.
F940GOT,
F940 Handy GOT
Not applicable
F930GOT (-K) Not applicable
F920GOT (-K) Not applicable
ET-940 Not applicable
FX-10DM (-SET0) Not applicable
The following restriction applies when connected.
Contents of restrictions
Programming is enabled only in the function ranges such as instructions, device ranges and
program sizes available in the FX2N and FX2NC PLCs.
→ For supported models and device ranges, refer to the FX-10DM
USER’S MANUAL (Manual No. JY992D86401).
FX-10DU Not applicable
The following restriction applies when connected.
Contents of restrictions
It is limited to the device range and function range supported by the highest class model
(FX2N or FX2) applicable in the product version.
→ For supported models and device ranges, refer to the FX-10DU
Operation Manual (Manual No. JY992D34701).
To Next Page
Loading...
Need help?
General
