Mitutoyo EJ-102N - Supported Linear Gages

3
No. 99MBC139A
1 Overview
1.3 Supported Linear Gages
Linear Gages compatible with EJ Counter are as follows.
■Linear Gages with 10-pin connector
Code No. Model No.
Specications
Type Resolution Stroke
542-190 LG100-110
Standard/with origin
0.001mm(1μm)
10 mm
542-191 LG100-0510 0.0005mm(0.5μm)
542-192 LG100-0110 0.0001mm(0.1μm)
542-193 LG100-125 0.001mm(1μm)
25 mm542-194 LG100-0525 0.0005mm(0.5μm)
542-195 LG100-0125 0.0001mm(0.1μm)
542-196 LG100-150 0.001mm(1μm)
50 mm
542-197 LG100-0550 0.0005mm(0.5μm)
■Linear Gages with 8-pin connector
Tips
• An optional adapter cable (Part No. 21HZA194) is required for connection.
For adapter cable external dimensions, see "6.3 Options" on page 58.
• ConnectiontoLinearGagesotherthanthoselistedbelowispossibleaslongastheysupportdi󰀨erential
square wave output (optional adapter cable required).
Code No. Model No.
Specications
Type Resolution Stroke
542-164 LGF-110ZL- B
Standard/with origin
0.001mm(1μm)
10 mm
542-165 LGF-125ZL-B 25 mm
542-166 LGF-150ZL-B 50 mm
542-174 LGF- 0510ZL-B
0.0005mm(0.5μm)
10 mm
542-175 LGF-0525ZL-B 25 mm
542-176 LGF-0550ZL-B 50 mm