Mitutoyo EJ-102N - Measurement Functions; Switching the Display Channel (Ch.)

22
No. 99MBC139A
3 Operation Procedure
3.2 Measurement Functions
3.2.1 Switching the Display Channel (Ch.)
During count display screen display, the dis-
played channel (Ch.) changes each time the
[SEL/CE] key is pressed.
Tips
• The factory default is to display the A-axis
count on Ch. 1 and the B-axis count on Ch. 2.
• Content of individual channel (Ch.) displays can
be changed by the setting of Parameter Number
03.
For details about Parameter Number 03, see
"■Advancedparameters"onpage34.
MODE
Fn
SEL / CE
Ch.
TIR
P.SET
1
Channel (Ch.) 1 display
MODE
Fn
SEL / CE
Ch.
TIR
P.SET
2
Channel (Ch.) 2 display