Mitutoyo EJ-102N - Display

6
No. 99MBC139A
1 Overview
1.4.2 Display
MODE
Fn
SEL / CE
Ch.
TIR
P.SET
MAXMIN
in21
①
③
②
⑥⑤ ⑦ ⑧ ⑨
④
■Operation key
No. Name Description
①
[SEL/CE] key Used for switching channels and moving between items when
making various settings.
Cancels errors when pressed together with the [Fn] key.
Tips
For details about the A-axis, B-axis and channels, see
"■Advancedparameters"onpage34.
②
[MODE] (>) key Used for peak mode selection and for moving between digits
when making various settings. When pressed together with the
[Fn] key, enters the parameter setting screen.
③
[P.SET] (^) key Used for setting preset values.
Clears preset or peak values when pressed together with the [Fn]
key. When setting preset / tolerance or parameter values, increas-
es the value of the selected digit.
④
[Fn] key Used to start and end setting of preset/tolerance values.
■Numeric and indicator display screen
No. Name Description
⑤
Numeric display Displays numeric values.
⑥
Displays the channel
(Ch.).
The selected channel (Ch.) lights.
Content of individual channel (Ch.) display varies according to the
setting of Parameter Number 03.
Tips
For details about Parameter Number 03, see
"■Advancedparameters"onpage34.
⑦
Unit display
(EJ-102NE only)
The LED lights when display in inches is selected. The LED goes
out when display in mm is selected.
⑧
Tolerance indicator Indicates the result of tolerance judgment.
is displayed when an error occurs.
Tips
For details about the tolerance judgment display, see "3.2.4 Toler-
ance Judgment" on page 26.
⑨
Peak indicators TheLEDsgoonoro󰀨accordingtothepeakmodeselected.
Wheno󰀨:Thecurrentvalueisdisplayed.
When only MAX is lit: The maximum value is displayed.
When only MIN is lit: The minimum value is displayed.
When both MAX and MIN are lit: The run-out width (maximum
value - minimum value) is displayed.