Mitutoyo EJ-102N - Operation Flow

8
No. 99MBC139A
1 Overview
1.6 Operation Flow
Thebasicowofoperationisexplainedbelow.
Be sure to perform operations enclosed by solid lines. Perform operations enclosed by dashed lines as
necessary.
Prepara-
tion
Setup
"2 Setup" on page 9
Parameter settings
"3.3 Parameter Setting" on page 30
Measure-
ment
Workpiece preparation
(Prepare the master workpiece as necessary.)
Presets/tolerance value settings
"3.2.5 Setting Preset/Tolerance Val-
ues" on page 27
Zero setting/Presets
"3.2.2 Preset" on page 23
Normal measurement/
Peak mode measurement
"3.2.3 Peak Hold" on page 25
Output
Result output
"4 Data Output" on page 41